Accessories for the CL plus series of lasers.

CL Plus beam extender

The CL Plus beam extender/light tube (pictured below) is a tube about 5mm in diameter which allows the laser beam to irradiate narrow cavities such as the mouth or the nose.
It clips onto the front of the laser via a polymer tube. Tube losses are 20% so make allowances for that when using it by extending the time.

CL Plus Beam Spreader
The second laser accessory is the beam widener/spreader (pictured below), which increases the beam to 40mm in diameter.  
This makes irradiation of large areas easier. This is a one piece device also used with CL plus lasers.

Both devices are a push fit on the front of the laser. Both devices are in stock at present.

The PS3 Laser Point Detector

The laser point detector unit (shown above) is used to locate acupuncture points on a conduction basis.

Connect point detector to the laser by means of the wire lead by plugging the lead into the back of the CL plus laser and connecting the other end to the front of the point finder. Patient holds the point finder in a cupped hand.
Move the laser tip to the skin and move the tip around and when the acupuncture point is found the point finder will emit a higher pitched sound and a rapidly flashing a green light.

This is a revised version of the Acupak 2020 Accessories Newsletter.